|
|
|
6650-0008-00*
|
CR-600 - Cosine Receptor
|
|
|
|
For cosine corrected illuminance/irradiance measurements. Replaces the MS-75 lens
during use.
|
|
|
|
6650-0008-01
|
FH-600 - Filter Holder
|
|
|
|
|
Designed to hold two 2" x 2" (51 mm x 51 mm) filters. Ideal for filter transmission
measurements. Threads into the MS-75 or SL-1X lenses.
|
|
|
|
6650-0008-02*
|
FP-600 - Flexible Probe
|
|
|
|
2 foot (60.9 cm) long probe designed for contact measurements of luminance and radiance.
Probe tip is 0.125" (3.18 mm) diameter. Replaces the MS-75 during use.
|
|
|
|
6650-0008-03*
|
IS-600 - Integrating Sphere
|
|
|
|
This 3" (76.2 mm) integrating sphere is designed to measure small point sources
(e.g. miniature lamps, LED's, etc.) over 4p steradians. Calibrated for Radiant Flux(watts)
and Luminous Flux(lumens), color temperature, xy coordinated and spectral data.
Accepts 0.125" (3.18mm) and 0.250" (6.36mm) sources and replaces the MS-75 during
use. Consult factory for other special sizes.
|
|
|
|
6650-0008-04*
|
ICC-600 - Integrating Cosine Corrector
|
|
|
|
This 3" (76.2 mm) integrating sphere features a 1 inch (25.4 mm) entrance port and
is designed for applications where the integrated measurements of point sources
is required. The sphere is fully baffled to insure complete integration of the incoming
radiant energy. Calibrated for Irradiance (watts /meter2) and Illuminance (footcandles
and lux).
|
|
|
|
6650-0008-05*
|
LA-600 - Luminance Adapter
|
|
|
|
Contact measurements for luminance and radiance are performed with this adapter
which covers 0.52" (13.2 mm). Replaces the MS-75 during use.
|
|
|
|
6650-0008-17
|
LR-55 - LED Receptor
|
|
|
|
|
Designed to measure discrete LED's, the accessory accepts 0.125" (3.18 mm) diameter
and 0.25" (6.36 mm) diameter LED's. Calibrated for radiant intensity (uw * sr-1)
and luminous intensity (millicandela) with an 8° acceptance angle. Replaces the
MS-55 during use. Consult factory for alternate LED diameters.
|
|
|
|
6650-0008-18
|
LR-127 - CIE 127 - LED Analyzer
|
|
|
|
This patented optical accessory is designed to test discrete LED's for compliance
to CIE 127. Tests both conditions A (far) and B (near) of the CIE recommendation.
Calibrated for luminous intensity (millicandelas). Both conditions can be tested
with the flip of a lever from 'A' to 'B'. No need to change tubes or even remove
the LED between tests. Accepts T1 (3 mm) and T1.75 (5 mm) packages. Replaces the
MS-55 during use. Consult factory for alternate LED packages.
|
|
|
|
6650-0008-08*
|
MS-2.5X - MicroSpectar™ Lens
|
|
|
|
|
2.5X magnification, fixed focus lens for luminance/radiance measurements. Replaces
the MS-75 lens during use. Provides 0.020" (0.51 mm) field coverage at a 1.81" (46
mm) working distance. Replaces the MS-75 during use.
|
|
|
|
6650-0008-15*
|
MS-5X - MicroSpectar™ Lens
|
|
|
|
|
5X magnification, fixed focus lens for luminance/radiance measurements. Replaces
the MS-75 lens during use. Provides 0.011" (0.289 mm) field coverage at a 1.11"
(28 mm) working distance. Replaces the MS-75 during use.
|
|
|
|
6650-0008-09*
|
MS-75 - MacroSpectar® Lens
|
|
|
|
|
C mount lens focusable from 14" (0.25X magnification) to infinity. Field coverage
at 14" is 0.208" (5.25 mm). This is the Standard Objective Lens for the PR-650.
|
|
|
|
6650-0008-07*
|
ND-600-1 - Neutral Density Filter - ND1
|
|
|
|
|
This 10X attenuator is used for measuring samples exceeding approximately 5,000
fL. It can be mounted on either the MS-75 or SL-1X lenses. Attenuates the signal
by approximately 10X.
|
|
|
|
6650-0008-06*
|
ND-600-2 - Neutral Density Filter - ND2
|
|
|
|
|
This 100X attenuator is used for measuring samples exceeding approximately 50,000
fL. It can be mounted on either the MS-75 or SL-1X lenses. Attenuates the signal
by approximately 100X.
|
|
|
|
6650-0008-16*
|
ND-600-3 - Neutral Density Filter - ND3
|
|
|
|
|
This 1000X attenuator is used for measuring samples exceeding approximately 500,000
fL. It can be mounted on either the MS-75 or SL-1X lenses. Attenuates the signal
by approximately 1000X.
|
|
|
|
6650-0008-10*
|
SL-0.5X - Supplementary Lens
|
|
|
|
|
0.5X magnification lens that provides a field coverage halfway between the MS-75
and SL-1X lenses. The working distance is 3.6" (91.4 mm) - 5.4" (137 mm) for a field
coverage range from 0.059" (1.5mm) - 0.10" (2.54 mm). Threads into the MS-75 during
use.
|
|
|
|
6650-0008-11*
|
SL-1X - Supplementary Lens
|
|
|
|
|
1X magnification, fixed focus lens for luminance/radiance measurements. Threads
into the MS-75 lens during use. Provides a working distance range from 1.8" (46
mm) - 2.6" (66 mm) for a field coverage range of 0.035" (0.89 mm) - 0.052" (1.32
mm)
|
|
|
|
6650-0008-12*
|
MS-7.5 mm - MacroSpectar® Wide-Field Lens
|
|
|
|
|
C mount lens with a 3.94" minimum working distance (0.025X magnification) to infinity.
Field coverage at 3.94" is 0.69" (17.5mm). This lens is suitable for large area
coverage at short distance for non-contact color quality control (L*a*b*) measurements.
|
|
|
|
6650-0008-13
|
RS-3 - Reflectance Standard
|
|
|
|
|
2" diameter (51 mm diameter) PTFE reflectance standard used for making ambient light
measurements, measurements of point sources (e.g. lamps) or measurements of the
illuminating source for reflectance or L*a*b* calculations. The RS-3 is uncalibrated,
meaning that all spectral reflectance correction factors are set to 1.00. SAE ¼
- 20 thread, black anodized, aluminum case.
|
|
|
|
6650-0008-14
|
SRS-3 - Spectrally Calibrated Reflectance Standard
|
|
|
|
|
All the capabilities of the RS-3 and calibrated for absolute spectral reflectance.
Includes reflectance factors and certificate of calibration.
|
Printer Friendly Page
PR-650 Brochure