|
|
|
6650-0009-00
|
AC-600 - AC Adapter and Rapid Charger (with 117 VAC North American Power Cord)
|
|
|
|
|
AC Adapter (battery eliminator) and intelligent rapid battery charger (2 batteries
in one hour or less depending on existing charge). Contains circuitry that prevents
overcharging battery. Universal AC input.
|
|
|
|
6650-1009-00
|
AC-600 - AC Adapter and Rapid Charger (with 240 VAC Continental Europe Power Cord)
|
|
|
|
|
|
|
|
|
6650-0009-01
|
AA-600 - DC to AC Adapter
|
|
|
|
|
Allows the PR-650 to be powered from a 12 Volt car battery via a plug-in converter.
Converts 12 Volts DC to 117 Volts AC (140 watts continuous)
|
|
|
|
6650-0009-02
|
CD-600 - Charger/Discharger (Universal AC input)
|
|
|
|
|
Rapid charger that can charge the NiCad battery in approx. 2 hours. Also, Allows
the user to discharge the battery fully before charging. (117 VAC - North American
Plug
|
|
|
|
6650-1009-02
|
CD-600 - Charger/Discharger (Universal AC input)
|
|
|
|
|
(240 VAC Continental Europe Plug)
|
|
|
|
6650-2009-02
|
CD-600 - Charger/Discharger (Universal AC input)
|
|
|
|
|
(240 VAC Continental U.K./Ireland Plug)
|
|
|
|
6650-3009-02
|
CD-600 - Charger/Discharger (Universal AC input)
|
|
|
|
|
(100 VAC - Japan)
|
|
|
|
6650-0009-03
|
BE-600 - AC Adapter (with 117 VAC North American Power Cord)
|
|
|
|
|
10 ft. AC Adapter (battery eliminator) with universal AC input.
|
|
|
|
6650-0009-16
|
BE-600-25 - AC Adapter (with 117 VAC North American Power Cord)
|
|
|
|
|
25 ft. AC Adapter (battery eliminator) with universal AC input.
|
|
|
|
6650-1009-03
|
BE-600 - AC Adapter (10 ft. with 240 VAC Continental Europe Power Cord)
|
|
|
|
|
|
|
|
|
6650-0009-04
|
BP-600 - Battery Pack
|
|
|
|
Spare battery for PR-650. Up to 2 hours continuous operation. Standard equipment
with the PR-650.
|
|
|
|
6650-0009-05
|
BPX-600 - Battery Pack Extended-Use
|
|
|
|
|
The battery pack is a lead-acid battery that provides the proper current required
to operate the PR-650. The battery pack renders more than 20 hours of operation
in remote locations where an AC power source is not available or inconvenient. The
dimensions are 7.87" X 4.72" X 2.95" (19.9 cm X 11.8 cm X 7.8 cm) and 5 lbs 13 oz.
|
|
|
|
6650-0009-06
|
CC-600 - Molded Carrying Case
|
|
|
|
|
Fiberglass carrying case with molded foam inserts offering maximum protection for
the PR-650 and accessories.
|
|
|
|
6650-0009-07
|
SS-CC-600 - Soft Sided Carrying Case
|
|
|
|
|
Camera bag type with shoulder strap. Standard equipment with the PR-650.
|
|
|
|
6650-0009-08
|
DC-600 - Power Supply Adapter
|
|
|
|
|
This battery eliminator is designed for use with a linear power supply. It consists
of a pseudo battery and three leads (pos., neg., and tracking) for use with most
DC supplies. Requires a 13 VDC @ 800 mA linear supply tracking or non-tracking type.
|
|
|
|
6650-0009-09
|
GPIB-232 - Interface IEEE-488 to RS-232 (100 - 117 VAC, with North American Power
Cord)
|
|
|
|
|
Use this accessory to control the PR-650 from an IEEE-488 interface bus using Remote
Mode software ASCII commands. RS-232 (e.g. parity, baud rate, stop bits) and IEEE-488
(e.g. IEEE-488 address, talk/talk listen) configuration parameters can be manually
set. Includes:
- Interface with IEEE-488 connector and 9 pin sub D RS-232 connector, on/off switch
and configuration dip switches.
- Instruction Manual
|
|
|
|
6650-1009-09
|
GPIB-232 - Interface IEEE-488 to RS-232
|
|
|
|
|
(220 - 240 VAC, with Continental Europe Power Cord)
|
|
|
|
6650-0009-10
|
IFC-600 - RS-232 Interface Cable
|
|
|
|
|
Used for SpectraWin, Remote Mode software and SAVE/RESTORE functions. 25 pin sub-D
female connector on Host (PC) side. Standard equipment with the PR-650.
|
|
|
|
6650-0009-11
|
PC-600 - RS-232 Printer Cable
|
|
|
|
|
Designed to connect an RS-232 printer to the PR-650 for tabular printouts when using
the PR-650 in a stand alone configuration (not attached to a Host computer). Provided
with a 25-pin sub D female connector.
|
|
|
|
6650-0009-12
|
Integrated Camera Adapter Kit - 600 (Black & White Camera and Black & White
Monitor)
|
|
|
|
|
This kit is ideal for remote viewing of the area being measured. The kit consists
of a camera, mounting hardware, power supply, cable harness and 12" monitor that
can be easily installed by the user. The CCD camera is integrated into the viewing
optics to provide a magnified view of the Pritchard mirror alignment against the
item being measured. This is ideal for automated test environments where the optical
head may not be easily accessed.
|
|
|
|
6650-0009-13
|
Integrated Camera Adapter Kit - 600 (Color Camera and Color Monitor)
|
|
|
|
|
|
|
|
|
6650-0009-14
|
USB Adapter - USB to Serial Port Connector for the PR-650.
|
|
|
|
|
|
|
|
|
6650-0009-15
|
TR-15 - Tripod
|
|
|
|
|
Fully adjustable tripod with SAE 1/4 - 20 screw mount for stable measurements with
the SpectraScan when an optical table or bench is not available.
|
Printer Friendly Page
PR-650 Brochure