The displays (CRTs) are mounted on an adjustable mount to accommodate 14" to 21" displays. The CRT mount has height adjustment as well as a distance adjustment to the photometer to allow the insertion of a reflectance standard between the photometer and the CRT to establish absolute illumination levels.

The set up is accomplished by using a simple procedure that uses a HeNe laser pre-aligned to the railing system. This method assures an expedient alignment setup. The integrated camera system in the photometer's viewing optics allow the user to remotely view the photometer and display alignment using the actual sphere light source image as visual target. Nuances such as double image reflections can be easily aligned with the photometer's adjustable mounting platform.

The regulated constant current sources operate the two tungsten-filament lamp sources with the highest regulation possible. Stability of the light sources can be reached within 5 minutes to perform accurate measurements. The power supply operates with a ± 0.01% uncertainty with a ramp function to avoid electrical shocking to the filament. The power supply also has a built in elapsed time meter that allows the user to keep track of the operation time on the light sources. These supplies come with an RS-232 interface (IEEE-488 optional) to access the internal microprocessor's control functions via a user's command program for automation of lamp operation.

The complete system can be mounted on a 150cm X 180cm optical table to assure flexibility for other types of reflectance measurements.